OSHA recently fined a roofing company over $200,000 when an employee was killed when he fell 16 feet through a skylight. OSHA issued eight willful citations to the company for its failure to provide fall protection in hoisting areas and on low-sloped roofs; failing to cover skylight openings to prevent falls; and not training employees about fall hazards. Seven of the citations allege per-instance willful violations of three OSHA requirements. A willful violation is defined as one committed with an intentional disregard of, or plain indifference to, the requirements of the Occupational Safety and Health Act and regulations.

Falls are the #1 cause of worker’s death in the construction industry.  The Compliance Resource Center reported on (ANSI)/ASSE Z359.2 fall protection in May of 2007.  Fall protection must be provided at four feet in general industry, five feet in maritime and six feet in construction. Here are some Fall Protection Tips from OSHA:

Fall Protection Tips
• Identify all potential tripping and fall hazards before work starts.
• Look for fall hazards such as unprotected floor openings/edges, shafts, skylights, stairwells, and roof openings/edges.
• Inspect fall protection equipment for defects before use.
• Select, wear, and use fall protection equipment appropriate for the task.
• Secure and stabilize all ladders before climbing them.
• Never stand on the top rung/step of a ladder.
• Use handrails when you go up or down stairs.
• Practice good housekeeping.  Keep cords, welding leads and air hoses out of walkways or adjacent work areas.